Incra Wonder Fence ultra User Manual download pdf

Use hex tool to loosen fasteners

thru the two larger holes

FIG. 1

Manufactured by: Taylor Design Group, Inc.

■

P.O. Box 810262

■

Dallas, Texas 75381 02-2005

Attaching the Wonder Fence and Hi-Rise

Accessories to the Ultra with the Pro II Fence

FIG. 4

FIG. 3

FIG. 2

Slide nuts

into T-slot

/4-20 x

/8" socket head

screws with washers

Rectangular nuts captured

in T-slot

Fence

cap brace

/4-20 x

/2 socket

head screw with washer

Support bracket rectangular

nut captured in T-slot

Fence

cap

brace

/8"

You have purchased the Incra Jig Ultra equipped

with the new Pro II Fence. Use the following

instructions for attaching the Wonder Fence and Hi-

Rise Fence cap braces. These instructions will be

used in place of the referenced instructions from the

Wonder Fence owner’s manual.

ATTACHING TO YOUR INCRA JIG ULTRA

(Replaces “Attaching to your Incra Jig Ultra” from

page 3 of the Wonder Fence owner’s manual.)

Loosen attachment fasteners

Insert the supplied hex tool through the two large diameter access

holes located on the front of each Wonder Fence and loosen the

two socket head screws. Do not remove the rectangular nuts.

For a better view of the fasteners, loosen the thumbscrew and slide

the black plastic view panel located on the top of each fence half.

See Fig. 1.

Slide Wonder fence into position on Pro II fence

Slide the two rectangular nuts on each Wonder Fence into the T-slot

located on the front face of the Pro II Fence. Position the Wonder

Fence halves so that your router collet is centered on the opening

between the fences, then tighten the two socket head screws on

each fence half. Slide the view panel back in place and tighten the

thumbscrew. See Fig. 2.

Attach fence cap braces and support brackets

(Replaces Step 1, from page 10 of the Wonder Fence

owner's manual.)

Place a

/4" washer on each of the (2)

/4-20 x

/8" socket head

screws and insert through the hole on the front of each fence

brace. Loosely thread on a

/4-20 rectangular nut then slide the

nut into the T-slot located on the top of the Pro II fence. See Fig.

3. Locate the two braces on the fence spaced 7

/8" apart. Tighten

the fasteners with the supplied hex tool.

Place a

/4" washer on each of the (2)

/4-20 x

/2" socket head

screws supplied and insert through the slotted holes located on the

support brackets. Loosely thread on a

/4-20 rectangular nut then

slide the nut into the T-slot located on the rear of the Pro II Fence.

Position the support brackets directly under the fence cap braces.

Slide the support brackets up to firmly contact the underside of the

fence cap braces then tighten the socket head screws. See Fig 4.

You can now continue the Hi-Rise Fence Cap assembly beginning

with Step 2 from page 10 of the Wonder Fence owner's manual.

INCRA Wonder Fence Addendum

INCRA Wonder Fence Addendum 1

Summary of Contents

Page 1 - INCRA Wonder Fence Addendum

Use hex tool to loosen fasteners thru the two larger holesFIG. 1Manufactured by: Taylor Design Group, Inc. P.O. Box 810262 Dallas, Tex

Comments to this Manuals

No comments

Incra Wonder Fence ultra User Manual

Browse online or download User Manual for Tools Incra Wonder Fence ultra. INCRA Wonder Fence ultra User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Incra Wonder Fence ultra