®Please read this owner’s manual before use and keep it at hand for reference. Important safety instructions for using the INCRA
After carefully unpacking all components, remove the (2) phillips flat head screws and rectangular nuts that secure the (2
#10-24 x 1⁄2" phillips flat head screws (7 places)Cut to remove right side overhangUsing the supplied 3⁄32" hex
Using (4) #10-24 x 3⁄4" phillips flat head screws, attach the remainder of the Right Sled
Left-hand tooth engaged with 0° notchLoosen the large clamping knob and make sure that the rear actuat
Loosen the rear actuator thumbscrew. Use the left-hand tooth to add or subtract from the coarse adjustment setting in 1° intervals. Use the right-ha
Remove the fence from the protractor head. Remove the large clamping knob, 1⁄4 x 3⁄4" shoulder bolt and washers that secure the protractor head
Place a 9⁄16" o.d. nylon washer on the 1⁄4-20 x 3⁄4" thumbscrew. Carefully position the remaining (2) 9⁄16" nylon and (1) 9⁄16" s
Comments to this Manuals