Incra GlideLOCK Miter Bar User Manual download pdf

Fig. 1

For Standard

Miter Slots –

Factory

Configuration

Fig. 2

For

Undersized

Miter Slots

Fig. 3

For Oversized

Miter Slots

NEW and IMPROVED GlideLOCK

™

Miter Bar

Your INCRA Miter Gauge package now includes a new and improved

GlideLOCK

™

Miter Bar

. The improved Miter Bar features

both expandable (white) and non-expandable (black) discs that make it even easier to adjust for a perfect fit in a wider range of

miter slot widths. The Miter Bar is factory assembled with expandable (white) discs on the left side of the bar, and non-expandable

(black) discs on the right side. This factory arrangement makes it easy to fit the Miter Bar in the majority of table saws and router

tables that use a standard

⁄

⁄8⁄

” x

⁄

⁄4⁄

” miter slot. By either removing the black discs, or replacing them with the included additional

white expansion discs in

Hardware Pack

C-06

, you can change the expansion range to fit undersized, oversized, or even variably

sized slot dimensions.

Below is a description of the 3 main expansion ranges and the recommended disc configuration:

For UNDERSIZED Miter Slots

Fits slightly

undersized

miter slots such as

undersized miter slots such as undersized

Sears/Craftsman.

Expansion Range:

0.735” to 0.745”

Disc Configuration (

Fig. 2

White expansion

discs on the left side of the bar and black

discs REMOVED from the right. To reduce the

Miter Bar’s width for table saws with slightly

undersized miter slots, remove the black

discs and fasteners from the right side of the

bar. Adjust the expansion discs on the left

side of the bar when fitting to the miter slot.

For OVERSIZED Miter Slots

Fits slightly

oversized

miter slots.

oversized miter slots. oversized

Expansion Range:

0.750” to 0 .770”

Disc Configuration (Fig. 3):

White expansion

discs on BOTH sides of the bar. REMOVE the

black discs on the right side of the bar and

replace them with the included additional

white expansion discs in

Hardware Pack C-

Use this configuration when fitting the

Miter Bar to oversized or worn miter slots,

or if you just prefer expansion discs on both

sides of your Miter Bar.

Made by:

Taylor Design Group, Inc.,

P.O. Box 810262, Dallas, Texas 75381

Web Site:

www.incra.com

INCRA is a registered trademark

of Taylor Design Group, Inc.

08/01

Note:

When installing the white expansion discs,

orient the disc in the bar so that the slit in the

disc is located about

” from the opening

in the side of the Miter Bar,

Fig. 4

If the slit

is rotated into the opening, the disc will not

expand properly.

White

expansion

discs on

left

side of

Miter Bar

Black

discs

right

side of

Miter Bar

White

expansion

discs on

left

side of

Miter Bar

Black discs

removed

from

right side

White

expansion

discs on

BOTH

sides

of Miter Bar

White

expansion

disc on

BOTH

sides

of Miter Bar

Rotate slit

” away from

opening in

Miter Bar

drawing

not to scale

drawing

not to scale

drawing

not to scale

For STANDARD Miter Slots

Factory configuration

Fits

standard

⁄

⁄8⁄

” x

⁄

⁄4⁄

” miter slots such as

Delta, Powermatic, Jet, Grizzly, General,

etc.

Expansion Range:

0.745” to 0.755”

Disc Configuration (Fig. 1):

White

expansion discs on the left side of the bar

and black discs on the right. This is the

factory configuration and requires only the

expansion discs on the left side of the bar

to be adjusted when fitting to your table

saw or router table’s miter slot.

Fig. 4

Summary of Contents

Page 1 - Miter Bar

Fig. 1For Standard Miter Slots –Factory ConfigurationConfigurationConfigurationConfigurationFig. 2For Undersized Miter SlotsFig. 3For Oversized For Ov

Comments to this Manuals

No comments

Incra GlideLOCK Miter Bar User Manual

Browse online or download User Manual for Tools Incra GlideLOCK Miter Bar. INCRA GlideLOCK Miter Bar User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Incra GlideLOCK Miter Bar